w
www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
Or
EMERGENCY SWITCH OFF:
Press the cover of the ON/OFF switch
closed.
•
BLADE HEIGHT ADJUSTMENT WHEEL
:
Set the blade height (cutting depth) by turning the hand wheel
.
•
BLADE ANGLE ADJUSTMENT THUMB KNOB
/ SAFETY LOCK THUMB KNOB
:
The inclination angle of the saw blade can be set to any angle between 0° and 45°.
The required angle can be easily determined from the scale.
Warning:
After every setting of the angle always fix/secure the saw blade in place – turn the
safety lock thumb knob
to the right.
•
GUIDE FENCE
:
Attach the guide fence at both ends by tightening the screws and use the scale with the magnifying
glass to determine the exact readings in order to achieve an absolutely straight cut (see Fig. E).
• MITRE
GUIDE
:
Use the mitre guide only when fully installed (with the guide rails). Slide the mitre guide from the
front into the groove in the saw table. By loosening the clamping screw, the angle can be set to
± 60°, see Figs. C and F.
ADVICE ON USE
Always switch on the table saw before bringing the material into contact with the blade.
Then feed the workpiece evenly from the front towards the back of the machine.
SAWING
0
1. First set the required blade height.
Please make sure that
: the dust cowl
has about 10 mm
clearance from the workpiece.
0
2. If required set, the blade angle as described above. Then fix/secure the saw blade with the safety
lock thumb knob
by turning it to the right.
0
3. Attach the guide fence.
0
4. Switch on the machine as described above.
0
5. Slide the workpiece evenly from the front to the back of the machine, see figures B and D.
Saw the workpiece in one operation.
Use the push stick if the
distance between the guide fence
and the blade is
120 mm
.
0
6. Switch off the machine immediately if you are not going to continue to use it
18
t
1 manual PTKS 1800 21.01.2004 13:08 Uhr Seite 18
Содержание PTKS 1800
Страница 1: ...PTKS 1800 2003...
Страница 3: ...B C D E F G A a...
Страница 70: ...w www kompernass com www kompernass com www kompernass com D 2 EN 847 1 HSS 2 mm 4500 min 1 70 z...
Страница 117: ...www kompernass com manual design photos translations by ORFGEN Marketing Communication Essen Germany...