GB
│
IE
│
5
■
PTBS 30 A1
Connection principle of the
distributor tubes
q
/
w
All parts of the product that you
can connect to the distributor tubes
q
/
w
follow the same principle.
♦
Unscrew the union nut anti-
clockwise.
♦
Push the union nut with the
narrow side onto a distributor
tube
q
/
w
.
♦
Push the distributor tube
q
/
w
onto the bracket.
♦
Screw the union nut clockwise
onto the thread of the bracket.
Assembly
NOTE
►
Spread out the distributor
tubes
q
/
w
and leave them
in the sun for one to two
hours to make them easier to
straighten.
►
Use sharp all-purpose scissors
to cut the distributor tubes
q
/
w
. Straighten and deburr
the cut with a cutter if neces-
sary.
►
Use the long hose holders
0
for the wide distributor tubes
w
and the short hose holders
9
for the narrow distributor
tubes
q
.
♦
Lay out the wide distributor
tube
w
and cut it into the re-
quired lengths. Cut the ends of
all distributor tubes
w
straight.
♦
Connect the required L- and
T-connectors
2
/
3
with the
cut-to-size distribution pipes
w
.
IB_376360_PTBS30A1_LB8.indb 5
27.09.2021 10:48:08
