GB
│
IE
│
7
■
PTBS 30 A1
♦
Connect the inline drippers
8
and the shut-off valves
7
to
the distributor tubes
q
.
♦
Connect the end plugs
6
to
the distributor tubes
q
at the
points where you do not wish
to connect anything else.
♦
Clamp the wide distributor
tubes
w
into the long hose
holders
0
and push the hose
holders
0
into the ground.
♦
Clamp the narrow distributor
tubes
q
into the short hose
holders
9
and push the hose
holders
9
into the ground.
Operation
♦
Turn on the water tap. The base
appliance
1
regulates the
water pressure.
NOTE
►
The base appliance
1
has an
opening on one side through
which air is released if the wa-
ter pressure is too high. Make
sure that this opening is never
obstructed.
♦
Adjust the shut-off valve
7
(turn anticlockwise to open/
clockwise to close).
♦
Turn off the tap when you are
finished watering.
IB_376360_PTBS30A1_LB8.indb 7
27.09.2021 10:48:10