Parkside PTBM 500 D4, Перевод оригинальной инструкции

Страница: 16 / 64

1 6
G B I E
N I CY
Transport
Do not carry the bench drill
holding it on the motor unit.
Caution! Hot surface. There is a
risk of burns. Only transport the
machine when the motor unit
(
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
13) has cooled down com-
pletely.
If possible, carry the bench drill together
with another person. Grip the baseplate
(
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
17) with one hand and stabilise the
machine on the drive cover (
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
3) with the
other hand.
Waste disposal
and environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
them.
Electrical machines do not belong
with domestic waste.
• Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
Troubleshooting
Problem Possible Cause Error correction
Device doesn‘t
start
Emergency stop switch (5) has
been triggered
Reactivate the emergency stop
switch (5) by turning it. Press the on
switch (1) to restart the device
No mains voltage
Main circuit breaker is tripped
Check the socket, mains supply
cable, cord, mains plug; if necessa-
ry, have them repaired by a quali-
Check the main fuse
On/off switch (1/2) is broken Repair by Customer Care
Motor faulty
Repair by Customer Care
Strong vibrations
3
place
Check V-belt tension and tighten the
locking screw (12)
Bit not centrally clamped Check the bit in the drill chuck (4)
Loud squeaking
noise
V-belt tension is too high Check V-belt tension
Damaged V-belts (29) Check V-belts (29)
Damaged pulley Check pulleys