Parkside PSSA 20-Li A1, Перевод оригинальной инструкции

Страница: 12 / 75

PSSA 20-Li A1 ■ 8 │
GB
│
IE
│
NI
♦ Let go of the quick-release chuck so that it
returns to its initial position . The saw blade
is now locked .
Adjusting the footplate
RISK OF INJURY!
► Always switch the appliance off and remove
the battery before carrying out any work on
the appliance .
♦ Adjust the footplate according to the cutting
depth .
♦ To do so, undo the locking lever and move
the footplate to the corresponding position .
♦ Lock this position by closing the locking lever .
Adjusting the pendulum stroke
♦ You can use the pendulum stroke switch
to adjust the pendular movement of the saw
blade . You can achieve fine, clean-cut edges
without pendulum movement (setting "0") .
Deactivate pendulum movement when working
on thin workpieces . You can achieve an increas-
ingly fast work rate if the pendulum stroke is
activated (setting "I") .
Use
Switching on and off
Switching on:
♦ First press the safety lock-out and then the
ON/OFF switch . Afterwards, release the
safety lock-out .
Switching off:
♦ Release the ON/OFF switch .
Adjusting the rotational speed
Press the ON/OFF switch lightly for a low speed .
Increasing the pressure increases the speed .
NOTE
► The integrated motor brake ensures rapid
stoppage .
Guiding the sabre blade safely
To adapt to the workpiece and for safe placement,
the footplate can be swivelled . It must always be
in contact with the workpiece when the appliance
is running .
Practical advice on sawing
♦ Check the material to be worked to make sure
that all foreign objects have been removed,
e .g . nails, screws, etc .
♦ Ensure that the ventilation slits are not
covered .
♦ Switch the appliance on before moving it
towards the material to be worked .
♦ Switch the appliance off immediately if the saw
blade jams .
Open up the sawn gap using a suitable tool
and pull out the sabre saw .
■ Use the appropriate saw blade and stroke
rate for the material to be worked .
■ Saw blades optimised for your sabre saw are
available from retail stores in different lengths
for various purposes .
■ Saw the material at a constant speed .