Parkside PSKO 24 B2, Руководство по эксплуатации и технике безопасности

Страница: 7 / 108

3 GB/IE
2. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and suc-
cess.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to
the device or caused by the device arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the electrical
regulations and VDE provisions 0100, DIN 13 / VDE0113
not being observed.
Please consider:
Read through the complete text in the operating manual before
installing and commissioning the device.
This operating manual should help you familiarise yourself with
your power tool and teach you how to use it for its intended
purpose.
The operating manual include important instructions for the
safe, proper and economic operation of the power tool, for
avoiding danger, for minimising repair costs and downtimes
and for increasing the reliability and extending the service life
of the power tool.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the opera-
tion of the power tool in your country.
Keep the operating manual package with the power tool at
all times and store it in a plastic cover to protect it from dirt
and moisture. They must be read and carefully observed by all
operating personnel before starting the work. The power tool
may only be used by personnel who have been trained to use
it and who have been instructed with respect to the associated
hazards.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally
recognised technical rules relating to the operation of such ma-
chines must also be observed.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.
3. Device description (fig. 1-10)
1. Transport handle
2. Pressure switch
3. On/off switch
4. Air filter
4a. Filter housing
4b. Filter element
4c. Filter cover
4d. Hose
5. Wheel
5a. Fillister head screw
5b. Washer
6. Drain screw for condensate
7. Supporting foot
7a. Screw
8. Pressure vessel
9. Safety valve
9a. Exhaust nut
9b. Connection lock
9c. Cap of exhaust nut
10. Quick coupling (regulated compressed air)
11. Quick coupling (regulated compressed air)
12. Pressure gauge (set pressure can be read off)
13. Pressure gauge (vessel pressure can be read off)
14. Compressed air hose
14a. Plug nipple
14b. Quick coupling
15. Pressure regulator
16. Transport lid
4. Scope of delivery
1x air filter
1x supporting foot
2x wheel
1x compressed air hose
1x assembly material
1x operating manual
5. Proper use
The compressor is designed to generate compressed air for
compressed-air driven tools which can be driven with an air
volume of up to approx. 150 l/min (e. g. tire inflator, blow-out
pistol and paint spray gun). Due to the limited air output it is
not possible to use the compressor to drive tools with very high
air consumption (for example orbital sanders, die grinders and
hammer screwdrivers).
The compressor may only be operated in a dry and well venti-
lated indoor space.
The machine may only be used in the intended manner. Any
use beyond this is improper. The user/operator, not the manu-
facturer, is responsible for damages or injuries of any type re-
sulting from this.