Parkside PSBM 750 B3, Перевод оригинальной инструкции

Страница: 19 / 74

PSBM 750 B3 ■ 16
│
GB
│
IE
Use
WARNING!
► Switch the appliance off and remove the
power plug before starting any work on the
appliance.
Additional handle
NOTE
► For safety reasons, you should only use this
appliance with the additional handle
attached.
♦ Loosen the strap on the additional handle by
turning it clockwise.
♦ Push the additional handle in the direction of
the quick release chuck .
♦ Turn the additional handle to the required
position.
♦ The locking positions on the additional handle
must now be pushed over the locking pin on
the spindle of the appliance.
♦ Turn the additional handle anticlockwise
again to tighten it.
NOTE
► Move the additional handle into the
various locking positions depending on your
working position. Undo and lock the addition-
al handle as described previously.
Depth stop
♦ Push the locking button for the depth stop
and keep it pushed in.
♦ Insert the depth stop into the additional
handle .
♦ Make sure that the teeth on the depth stop
point upwards and downwards.
♦ Pull the depth stop out until the distance
between the tip of the drill and the tip of the
depth stop corresponds with the required drill-
ing depth.
♦ Release the locking button for the depth stop
to lock the depth stop .
Changing tools
♦ Turn the quick-release chuck towards
RELEASE to open it.
♦ Insert the desired tool into the quick-release
chuck .
♦ Turn the quick-release chuck towards
GRIP
to tighten the tool.
Operation
Select operating mode
Function selector switch:
♦ Push the function selector switch so that it
engages at the required symbol:
Function Symbol
Drilling
Impact drilling
Select direction of rotation
WARNING!
► The rotation direction switch may only
be used/adjusted if the appliance is at a
standstill.
♦ Select the direction of rotation by pressing the
rotation direction switch towards the left or
right.
Preselecting the rotation speed
You can use the rotational speed preselector
adjusting wheel to preselect the rotational
speed. The speed you select depends on the
material to be processed. Work out the right
setting by carrying out a practice test.:
NOTE
► The appliance only reaches the set rotational
speed during continuous operation.