PPS 200 B2
GB
│
IE
│
NI
│
CY
│
7
■
NOTE
►
If necessary, use the adapter by pushing it
into the nozzle .
Removal:
♦
Pull the hose of the vacuum cleaner off the
nozzle or adapter .
Work instructions, tips and tricks
♦
Move the appliance parallel to the surface and
in a flat circular motion or alternatively length-
wise and across the surface .
♦
Do not press the appliance down . The sanding
sheets will get clogged and the sanding perfor-
mance will deteriorate .
♦
Clean the sanding sheet every once in a
while using a vacuum cleaner .
♦
Never use the same sanding sheet for sanding
different materials (such as wood and then
metal) .
In the table below, you will find some recommended
values which will help you determine which sanding
sheet to use for which job .
Wood
Sanding sheet/grain
Working wood
40–240
Pre-sanding, e .g . of
unfinished, unplaned
beams and planks
40, 60
Surface sanding
80, 100, 120
Fine sanding of hard-
woods
180, 240
Paint/varnish
Sanding sheet/grain
Working of coats of
paint/varnish or prim-
ers such as filler
40–320
Removal of paint
40, 60
Sanding undercoat
80, 100, 120
Final sanding of prim-
ers before painting
180, 240, 320
Maintenance and cleaning
WARNING! RISK OF INJURY!
►
Always remove the plug from the mains
power socket before carrying out any work
on the appliance .
■
Always clean the appliance directly after
completion of work .
■
Do not use any sharp objects to clean the ap-
pliance . Do not allow any liquids to get into the
appliance .
■
Use a cloth to clean the housing . Never use
petrol, solvents or cleaning agents that can
damage plastic . A vacuum cleaner is required for
thorough cleaning of the appliance .
■
Ventilation openings must never be obstructed .
■
Remove any adhering grinding dust with a
brush .
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase . If this product has any faults,
you, the buyer, have certain statutory rights . Your
statutory rights are not restricted in any way by the
warranty described below .
Warranty conditions
The warranty period starts on the date of purchase .
Please keep your receipt in a safe place . This will
be required as proof of purchase .
If any material or manufacturing fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
or refund the purchase price (at our discretion) .
This warranty service requires that you present the
defective appliance and the proof of purchase (re-
ceipt) within the three-year warranty period, along
with a brief written description of the fault and of
when it occurred .
If the defect is covered by the warranty, your prod-
uct will either be repaired or replaced by us . The
repair or replacement of a product does not signify
the beginning of a new warranty period .
Содержание PPS 200 B2
