Parkside PPHM 14 A1, Инструкции по эксплуатации и безопасности

Страница: 20 / 268

20 GB
NOTE:
If the product has been used multiple times,
it might not be sufficient to clean the test liquid
absorption rod 1a by rinsing them with distilled water.
Dirt-residue might remain on the test liquid absorption
rod 1a.
In this case, use a soft plastic brush (such as a
toothbrush) to clean the test liquid absorption rod 1a.
Use minimum force only.
If necessary, add a few drops of distilled water on the
soft plastic brush.
While cleaning the test liquid absorption rod 1a, the
soft plastic brush must not come in contact with the
electrode probe 1 . Risk of damage to the electrode
probe.
After brushing off residue/dirt from the test liquid
absorption rod 1a: Rinse the electrode probe and
the test liquid absorption rod with distilled water for a
minimum of 15 seconds.