Parkside PNS 300 B2, Оригинальное руководство пользователя

Страница: 13 / 16

13
8. Noise and vibrations
levels
Tested according to EN 62841. The noise level
at the workplace may exceed 80 dB (A); safety
precautions are required for the operator in this
case (wear suitable hearing protection device).
Sound pressure level: LpA 88,2 dB(A)
Sound power level: LwA 99,2 dB(A)
Uncertainty: KpA / KwA 3 dB
Noise emission levels
Vibration details
Vibration level:
ah,D 3,9 m/s 2 ,
Uncertainty:
K 1,5 m/s
2
The overall vibration values and the noise
emission values specified have been measured
according to a standardized test method and can
be used to compare one power tool with another.
The overall vibration values and the noise
emission values specified can also be used for a
preliminary estimation of the load.
WARNING!
The vibration and noise emissions during the
actual use of the power tool may differ from the
specified values, depending on the manner in
which the power tool is used, especially, the type
of workpiece being machined
Safety measures may be required to protect the
operator that are based on an estimate of the
vibration load during actual usage conditions (in
this case all the parts of the operating cycle have
to be considered, such as times when the power
tool is turned off, and those where, the tool is
turned on, but is running without load).
9. Recycling
Disposal of packaging
Disposal of the drill
Dispose of packaging separately. Dispose
of card and paper in waste paper, plastic
at collection points.
This symbol indicates that this product
may not be disposed of together with
domestic waste in compliance with the
(2012/19/EC) directive pertaining to
waste electrical and electronic devices (WEEE).
This product must be handed in at an designated
collection point. This can occur, for example, by
returning it when a similar product is purchased
or by handing it in at an authorised collecting
point for the recycling of waste electrical and
electronic equipment. Owing to potentially
hazardous substances that are frequently
contained in waste electronic equipment,
incorrect handling of waste equipment may have
a negative impact on the environment and on the
health of human beings. By disposing of this
product correctly, you are also contributing
towards an efficient use of natural resources.
Information on collecting points for waste
equipment can be obtained from your local
authority, the public waste disposal authority, an
authorised institution for the disposal of waste
electrical and electronic equipment or the waste
collection services. Dispose of device and
packaging in an environmentally friendly manner.
10. Declaration of
conformity
The EU declaration of conformity can be found
on the penultimate page of this manual.