Parkside PMNF 1350 C3, Оригинальное руководство пользователя, Страница: 16 / 44

1 6
GB IE NI
Electrical machines do not belong
with domestic waste.
• Hand over the device at an utilization
location. The plastic and metal parts em-
ployed can be separated out and thus
recycled use can be implemented. Ask
our Service-Center for details.
• Defective units returned to us will be dis-
posed of for free.
Troubleshooting
Always unplug the shredder before working on it.
Risk of electric shock!
Problems Possible Cause Error correction
Device doesn‘t
start
Mains voltage missing
Main circuit breaker is trip-
ped
Check the socket, mains cable, line,
mains plug, repairs to be carried
out by qualified electrician if neces -
sary, check main circuit breaker.
On/off switch ( 2) may
be defective
Repair by Customer Care
Engine faulty
Grinding tool
does not move alt-
hough the engine
is runningt
Threaded clamping flange
(17) is loose
Tighten threaded clamping flange
(17) (see „Changing disc“)
Workpiece, remaining work-
pieces block drive
Remove blockages
Engine is slower
and stops
Device is overloaded
through workpiece
Reduce pressure on cutting tool
Workpiece unsuitable
Grinding disc
does not rotate
smoothly, abnor-
mal noises can be
heard
Threaded clamping flange
(17) is loose
Tighten threaded clamping flange
(17) (see „Changing disc“)
Cutting discs are defective Change cutting discs