Parkside PLSA 20-Li A1, Инструкция по эксплуатации

Страница: 6 / 97

PLSA 20-Li A1 ■ 2
│
GB
│
IE
CORDLESS SOLDERING
STATION 20V PLSA 20-Li A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for electronic soldering
for leisure and DIY purposes. It is designed for
applications such as soldering, welding plastics and
the application of ornamentation. The appliance
may only be used in conjunction with a Parkside
X 20 V Team battery as a power source. Use the
appliance only as described and for the specified
application areas. The appliance is not intended
for commercial use. Any other usage or modifica-
tion of the appliance is deemed to be improper and
carries a significant risk of accidents. The manufac-
turer accepts no responsibility for damage attribut-
able to misuse.
Features
1
Soldering iron
2
Soldering sponge
3
Holder for soldering iron
4
Chisel tip
5
Rechargeable battery*
6
ON/OFF switch
7
Status LED
8
Release button
9
Retaining nut
0
Fixing sleeve
q
Soldering tip
w
Solder
* BATTERY IS NOT INCLUDED
Package contents
1 cordless Soldering Station 20V PLSA 20-Li A1
incl. 1 soldering tip (pre-fitted)
1 chisel tip
1 solder, Ø 1.0 mm, 10 g
1 solder, Ø 1.5 mm, 10 g
1 soldering sponge
1 set of operating instructions
Technical specifications
Input voltage 20 V (DC)
Temperature range approx. 300–480°C
Mains cable 1.5 m from the soldering
iron to the station
Symbols on the appliance
WARNING! Special safety precau-
tions are required when working with
the appliance. Read and observe all
warnings.
Attention, hot parts. Maintain a safe
distance!