Parkside PLP 160, Руководство по эксплуатации и технике безопасности

Страница: 6 / 20

PLP 160 SOLDERING GUN
with practical soldering-point illumination
Dear Customer! We are delighted that you have decided to purchase our high quality PLP 160 soldering gun. Please make sure you familiarise
yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power
tools correctly. Please read the operating instructions below and the accompanying safety advice carefully. Use the equipment
only as described and for the indicated purposes. By doing this you will be able to work in complete safety and produce better results.
We hope you enjoy using your delta sander.
FEATURES OF THE PLP 160
Soldering tip Push-button switch (device switch)
Fixing screw Device handle
Operation indicator Device plug/cable
TECHNICAL DATA
Power input: 230 V max. soldering tip temperature: 540° C
Frequency: 50 Hz
Power: 160 W ON max. 12 sec. / OFF min. 48 sec.
Insulation class: II
Weight: 1000 g Bulb: 6 V / 3 W
IMPORTANT SAFETY ADVICE
a) Prior to starting, check that the soldering gun is in a defect-free, proper condition. If the power supply complies with the regulations,
the soldering wire may have become worn or fragile.
b) In order to avoid electric shocks, protect the soldering gun from rain and moisture.
c) Do not let any objects fall into the device.
d) Power cables run through the inside of the device handle. Never try to take the device apart yourself.
e) In order to avoid accidents, have defective device cables replaced or repaired exclusively by the manufacturer himself, by his customer service
or by an electrical specialist.
f) If you do not use the device for a lengthy period, it is imperative to pull the device plug out of the socket.
g) This device is only designed for household use.
OPERATING INSTRUCTIONS
This device may only be operated with 230 V alternating current and at a frequency of 50 Hz. Please check the voltage and frequency
before use.
• Insert the device plug into the socket.
• Hold the device tightly by the handle .
!
!
6