Parkside PLMB 4 A1, Перевод оригинальной инструкции

Страница: 11 / 42

11
NI IE GB
more than 5 V, the
charging current must
not be more than 1 A.
The battery status
indicator remains
on the display when the
battery is fully charged.
3. After charging, fi rst
disconnect the USB plug
(8) from the USB port/
power supply.
4. Then pull the USB-C plug
(9) out of the charging
socket (6).
Maintenance
The unit is maintenance-
free.
Cleaning
Switch off the device
before cleaning.
• Clean the device, using a
soft dry cloth so as not to
scratch the display (2).
• Do
not
use any abrasive
cleaning agents or
solvents. These could
damage the device
irreparably.
• Do not
use
water or
metallic aids. There is a
risk of a short circuit.
Storage
Store the device in a dry
place, out of reach of
children. The device must
not be exposed to direct
sunlight during storage.
Disposal /
Environmental
protection
The device and packaging
should be properly recycled.
Do not dispose
of devices with
a built-in
battery in the household
waste, a fi re (risk of
explosion) or water.
Damaged batteries can
harm the environment and
your health if poisonous
fumes or liquids escape.
• Dispose of the device
with the battery
discharged. Do not open
the device or battery.
• Dispose of the device
in accordance with the
local regulations. Take
the device to a recycling
plant. The plastic and
metal parts used on your
device can be properly
sorted according to
materials and grades
and effi ciently recycled.