Parkside PLGS 2012 A1, Оригинальное руководство пользователя, Страница: 33 / 330

33
GB MT
marks by pressing them.
8. Now press the , that has
the same color as the set
check mark.
9. Enter a WLAN name and
the corresponding password
to connect the charger to the
WLAN.
10. Confirm your entry.
The charger is now connec-
ted to the app. You can re-
cognize a successful connec-
tion by the fact that the
WLAN indicator (9) lights
up blue continuously.
11. Confirm the successful
connection with “ Finish ”.
The charger is now listed
in the tab and can be
selected.

If you have already connec-
ted other devices to the app:
5. On the tab , select the
in the upper right. The
app scans the area for avai-
lable devices and indicates
if available devices have
been found.
If this is not the case,
read on if possible

.
6. Proceed as with

from
point 7.

If a list of available devices
is not automatically suggested
to you:
If the charger is not suggested
automatical suggested, follow
these steps:
5. On the tab , select the
in the upper right.
6. Select “ Other ” in the bar on
the left.
7. Select “ Lidl Smart charger ”.
8. Follow the instructions in the
app.
Upgrading the firmware
can change the features
of the app.
If you have already pai-
red the device with the
Lidl Home App and press the
ECO button (8) and 60% button
(7) again for 5 seconds, the de-
vice switches to pairing mode