Parkside PLG 20 C1, Перевод оригинальной инструкции

Страница: 22 / 118

22
GB
Charging Process
Do not expose the
battery to extreme
conditions such as heat or
impact. Risk of injury from
escaping electrolytic solution!
After eye/skin contact, rinse the
affected areas with water or a
neutraliser and consult a doctor.
Charge the battery
in a dry room only.
Prior to attaching the charger,
check that the battery‘s outer
surface is clean and dry. There
is a risk of injury due to electric
shock.
To recharge batteries of the
(PArksidE) X 20 V Team
series, only use a
charger belonging to the
(PArksidE) X 20 V Team
series.
• Charge the battery before the
first time of use.
• Always take heed of the ap
-
plicable safety instructions
as well as the environmental
protection regulations and
information.
Checking the charge
status of the rechargeable
battery
The battery charge status indi
-
cator (3) signalises the state of
charge of the battery (4).
Press the button (2) on the bat
-
tery. The state of charge of the
battery is displayed by illumi
-
nating the 3-colour LEd lights of
the state of charge display.
3 LEDs light up
(red, orange and green):
Battery is fully charged.
2 LEDs light up (red and orange):
Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged
Only charge the battery
(4) when the red LEd on
the charge status indicator
(3) is on.