16 GB/CY
Working without the automatic
levelling system
Put the LOCK switch
4
into the position .
Push the ring-button
1
on the top of the product. Now the
product will release two laser lines from the laser beam open-
ing
6
that are not levelled. Operation without automatic lev-
elling will always be indicated via the red LED indicator
2
.
Push the ring-button
1
on top again to turn off the product at
this mode.
Practical guidance
Always use only the middle of the laser line for markings. The
width of the line depends on the distance.
Working with the clamp
The clamp provided can be used to attach the device to various
objects.
1. Release the clamping nut
10
by rotating the clamping nut anti-
clockwise.
2. Position the clamping jaws
9
to the desired location.
3. Rotate the clamping nut
10
clockwise until fastened.
4. Place
-thread
5
of cross line laser with the -screw
7
of
the clamp and tighten with hand. Do not use excessive force
as this may damage the device.
Содержание PKLL 7 C3
Страница 3: ...2 1 3 4 5 6 7 8 9 10 ...
Страница 4: ...1 2 A 3a A1 A2 5 ...
Страница 101: ...101 BG Сервиз Сервиз България Телефон 00800 111 4920 Е мейл owim lidl bg ...