Parkside PKA 20-Li B2, Перевод оригинальной инструкции

Страница: 13 / 195

PKA 20-Li B2
GB
│
IE
│ 9 ■
Switching on and off
Switching on the appliance (air pump)
♦ Set the ON/OFF switch to the
position
.
Switching on the appliance (compressor)
♦ Set the ON/OFF switch to the
position
.
♦ The appliance starts as soon as you switch on
the display (see section “Display”).
Switching on the LED work light
♦ Set the ON/OFF switch
7a
to position “I”.
The LED work light
7b
lights up.
NOTE
► The compressor will not work if the display
is switched off.
Switching off the appliance
♦ Set the ON/OFF switch to the position .
Switching off the LED work light
♦ Set the ON/OFF switch
7a
to position “O”.
Display
♦ Press the ON/OFF button to switch on
the display .
♦ After two seconds, the current pressure of the
connected item is shown.
NOTE
► If the compressed air hose is not connected
to a suitable item, the display indicator
shows "0".
♦ You can switch between “bar”, “psi” and “kpa”
on the display by pressing the ON/OFF
button .
NOTE
► The display (and also the compressor)
switches off after around three minutes of
inactivity.
► The compressor will not work if the display
is switched off.
NOTE
► The compressor switches off automatically
when the preset pressure has been reached.
♦ Press and hold the ON/OFF button for
5 seconds to turn off the display .
Setting the pressure
♦ Press the “+” button or the “−” button to
set the desired pressure.
TIP
► When you press and hold the "+" button
or the "-" button for a little longer, the
pressure setting changes quickly.
Use
Inflation with blower hose
♦ Remove the valve cap of the item you want
to inflate.
♦ Remove the blower hose from the storage
compartment .
♦ Fit the connection of the blower hose onto
the air outlet . Screw it in tight by turning it
clockwise.
♦ Fit the appropriate adapter or onto
the blower hose .
♦ Push the adapter or into the valve of
the item.
♦ Switch the appliance on by moving the
ON/OFF switch to the position
.
♦ Once the desired level of inflation has been
reached, switch off the appliance by moving
the ON/OFF switch to the position
.
♦ Now remove the adapter or .
♦ Replace the valve cap on the item that you
have inflated.