Parkside PHSA 12 A1, Перевод оригинальной инструкции

Страница: 44 / 120

44
GB MT
Maintenance
• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts. Check that the
screws in the safety knife bar (
1)
are tight.
• Check covers and safety devices (see
) for damages and correct installa
-
tion. Replace as necessary.
• You can smoothen minor nudges in
the cutting teeth yourself using a knife
grinder to sharpen the cutting edges.
The trimmer will only cut well if the
teeth are sharp.
• Blunt, bent or damaged knife bars to
be replaced.
Ask our service centre to carry out any
work that is not described in these instruc-
tions. Use only original parts.
Storage
• Keep the device in the blade guard
(
10) supplied, dry and out of reach
of children.
You can hang the device up verti-
cally on the suspension device (
11) on the blade guard (
10).
For this purpose, please attach two
hooks or screws (screw head 6-7
mm) to the wall (with the help of
bolts, where necessary), spaced
2.5 cm apart.
The retention inside the blade
guard prevents oil from dripping
down onto the safety cutter bar and
soiling the floor or wall. Residual oil
collects in the blade guard and can
be poured out into a residual oil
container.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to find these or consult an in
-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
fire. Contact with a gas pipe
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Waste Disposal
and Environmental
Protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Machines do not belong with do-
mestic waste.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.