Parkside PGG 15 A1, Перевод оригинального руководства по эксплуатации и технике безопасности

Страница: 59 / 67

59 GB
General safety advice for electrical power tools General safety advice for electrical power tools
connect it to the mains, pick it up or carry it. Accidents
can happen if you carry the device with your finger on the ON /
OFF switch or with the device switched on.
d) Remove any setting tools or spanners before you
switch the device on.
A tool or spanner left attached to a
rotating part of a device can lead to injury.
e) Avoid placing your body in an unnatural position.
Keep proper footing and balance at all times.
By doing
this you will be in a better position to control the device in unfore-
seen circumstances.
f) Wear suitable clothing. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves clear of
moving parts.
Loose clothing, jewellery or long hair can become
trapped in moving parts.
g) If vacuum dust extraction and collection devices are fitted
do not forget to check that they are properly connected
and correctly used.
The use of these devices reduces the haz-
ard presented by dust.
4. Careful handling and use of
electrical power tools
a) Do not overload the device. Always use an electrical
power tool that is intended for the task you are un-
dertaking.
By using the right electrical power tool for the job
you will work more safely and achieve a better result.
b) Do not use an electrical power tool if its switch is de-
fective.
An electrical power tool that can no longer be switched
on and off is dangerous and must be repaired.
c) Pull the mains plug from the socket before you make
any adjustments to the device, change accessories or