Parkside PFLA 4400 A1, Инструкции по эксплуатации и безопасности

Страница: 16 / 66

15 GB/IE/NI
NOTE:
The energy stored in the rechargeable batteries power both the
LED light and the charging station . Using the product as a charger therefore
reduces the operating time and brightness in lighting mode .
˜
Using as a LED light
Fully charge the product as described in the section “Charging the
product“ .
The product can be operated in 4 different modes . Select these by
repeatedly pressing the ON/OFF switch
[ 2]
.
ON/OFF switch Mode
Press 1x: 100 % brightness
Press 2x: 50 % brightness
Press 3x: SOS signal
Press 4x: Flashing
Press 5x: Switch off the light
˜
Using as a charger
When used with the USB cable
[ 10]
, the product may be used to charge
small electronics devices with USB socket (Type micro) for charging
(e .g . mobiles or digital cameras) .
The charging current the device requires may not exceed 2 A . Carefully
read the instructions for use of the device you wish to charge .
ATTENTION!
Charging a device which requires a higher charging current
may cause a defect in both devices .