Parkside PFDS 120 A2, Перевод оригинальной инструкции

Страница: 8 / 45

8
GB/IE/NI
15
Welding nozzle (0.9 mm)
16 Welding nozzle (1.0 mm)
17
Flux-core wire spool (wire reel)
Ø 0.9 mm / 450 g
18
Chipping hammer with wire brush
19 Feed rol
20
Shield body
21 Dark welding lens
22
Handle
23 Welding helmet after assembly
24
Mounting clip
25 Protective glass catch
26
Storage compartment for welding nozzles
27 Setting screw
28
Thrust roller unit
29 Roller holder
30
Feed roll holder
31 Wire outlet
32
Cable assembly bracket
33 Torch neck
z
Technical specifications
Mains connection: 230 V~ / 50 Hz
(alternating
current)
Welding current I
2
: 25–120 A
Duty cycle X: 10 % at 120 A
welding current,
60 % at 49 A
welding current
Open circuit voltage U
0
: 31 V
Greatest rated value
of the mains current: I
1max.
17.5 A
Effective value of the
greatest rated current: I
1eff
5.9 A
Welding wire reel max.: approx. 1000 g
Welding wire diameter
max.: 1.0 mm
Fuse: 16 A
Weight: 13.50 kg
Technical and visual changes can be carried
out over the course of the further develop-
ment without warning. Therefore, all the
dimensions, notices and specifications of
these operating instructions are not guaran-
teed. Thus, legal clams made as a result of
the operating instructions cannot be claimed.
z
Package contents
1 flux cored wire welder PFDS 120 A2
1 torch nozzle (pre-assembled)
4 welding nozzles
(1x 0.9 mm pre-assembled; 1x 0.8 mm;
1x 0.6 mm; 1x 1.0 mm)
1 chipping hammer with wire brush
1 flux-core wire Ø 0.9 mm / 450 g
1 welding helmet
1 carrying strap
1 set of operating instructions
Safety instructions
Please read the operating
instructions with care and observe
the notes described. Familiarise
yourself with the device, its
proper use and the safety notes
based on these operating instruc-
tions. The rating plate contains
all technical data of this welding
device; please learn about the
technical features of this device.
„
This device may be used by
children aged 16 years and
older, and by persons with
reduced physical, sensory or
mental capacities, or a lack of
experience and knowledge,
if they are supervised or have
Introduction / Safety instructions