16 GB
… / Disposal / Translation of the original declaration of conformity / Manufacturer
Start-up / Cleaning, care and storage / Warranty
13
12
31
approx. 13 mm
Changing the battery
Ensure the LED light is switched off. Remove the
three battery cover screws at the back of the
grip collar with LED
8
.
Remove the drained battery and replace with a
new battery (button cell LR41). Please note the
correct polarity when inserting the batteries.
Close the battery compartment by fastening the
three screws.
Cleaning, care and storage
RISK OF INJURY!
Switch the
tool off and pull the plug out of the mains socket
before carrying out any work on the tool.
Always keep the tool clean, dry and free of oil
or grease.
Use a dry cloth to clean the housing.
If the connection cable needs to
be replaced, this repair must be performed by
the manufacturer or a representative to prevent
safety hazards.
Carefully store the tool and all parts in desig-
nated plastic case to prevent losing any parts.
Note:
Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering
not carried out by our authorized service branch. Your
statutory rights are not restricted in any way by this
warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
