Parkside PET 25 C2, Перевод оригинальной инструкции

Страница: 19 / 68

PET 25 C2 ■ 16 │
GB
│
IE
Use
Switching on and off
♦ Set the ON/OFF switch to the position "I" to
switch the appliance on .
♦ Set the ON/OFF switch to the position "0" to
switch the appliance off .
Stapling/nailing
♦ Switch the appliance on by moving the ON/
OFF switch to the position "I" .
♦ Press the face plate of the appliance onto
the location on the material that you want to
staple/nail .
♦ Press the trigger .
NOTE
► The integrated safety switch on the face plate
prevents accidental triggering .
Working with the rip fence
If you want to tack with nails or staples at a con-
stant distance to an edge, proceed as follows:
♦ Pull out the rip fence in the direction of the
arrow .
♦ Move the rip fence along the scale until it
is at the required distance from the edge of the
object that you want to work on .
♦ Place the rip fence onto the edge of the
object that you want to work on .
♦ Proceed as described in the section Stapling/
nailing .
Troubleshooting
CAUTION!
► Ensure that the appliance has been discon-
nected from the power in order to prevent
it from being accidentally switched on and
causing injuries .
Cause:
A staple or nail is blocking the appliance .
Solution:
♦ Open the magazine slider . This will remove
the tension . Use the hex key (fig . D) to remove
the screws from the face plate .
♦ Remove the staple or nail .
Maintenance and cleaning
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance .
The electric staple gun is maintenance free .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Always clean the appliance directly after finish-
ing work .
■ Never permit liquids to enter inside the appliance .
■ Use a cloth to clean the housing . Never use
petrol, solvents or cleansers which can damage
plastic .
Disposal
The packaging consists of environmentally
friendly material . It can be disposed of in
the local recycling containers .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that worn-
out power tools be collected separately and recycled
in an environmentally compatible manner .
Your local community or municipal authorities can pro-
vide information on how to dispose of the appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
IB_310956_PET25C2_LB8.indb 16 10.12.18 13:31