PDBNP 14 B1
■
16
│
GB
│
IE
Hazards caused by flying parts
■
Disconnect the machine for threadless fasteners
from the power supply before replacing the
machine tool or accessories.
■
If a workpiece or accessory or even part of the
machine tool itself breaks, parts can be flung
off at high speeds.
■
Always wear impact-resistant eye protection
when operating the machine. The level of
protection required should be assessed sepa-
rately for each use.
■
In this case, the risks for others should also be
assessed.
■
You must ensure that the workpiece has been
securely fixed in place.
■
Check whether protection against ejection of
fastening elements and/or rivet shafts is avail-
able and effective.
Hazards during operation
■
When using the machine, the operator’s hands
may be exposed to hazards such as crushing,
impact, cuts, abrasions and heat. Wear suitable
gloves to protect your hands.
■
The operator and maintenance personnel must
be physically capable of handling the size,
mass and power of the machine.
■
Hold the machine correctly: Be ready to coun-
teract any normal or sudden movements – keep
both hands ready.
■
Ensure that your body is balanced and that you
have a secure standing position.
■
Release the start/stop control in case of a
disruption to the electricity supply.
■
Use only the lubricants recommended by the
manufacturer.
■
Avoid inappropriate postures as these postures
are likely to make it impossible to respond to
normal or unexpected movements of the
machine.
■
If the machine for threadless fasteners is
attached to a suspension device, the attachment
must be secured,
■
There is a risk of crushing if the equipment is not
attached to the machine head.
Hazards caused by repetitive
movements
■
When using a machine for threadless fasteners,
operators may experience uncomfortable
sensations in their hands and arms, as well as
in the neck and shoulders or other parts of the
body.
■
When using a machine for threadless fasteners,
the operator should adopt a comfortable
posture. Ensure that you have a secure foothold
and avoid unfavourable postures or postures in
which it is difficult to maintain balance. The
operator should change positions during the
course of long-lasting tasks. This can be helpful
for the prevention of discomfort and fatigue.
■
If the operator notices symptoms such as
persistent or recurring illness, discomfort, throb-
bing, pain, tingling, burning or stiffness, these
indications should not be ignored. The operator
should consult a suitably qualified physician.
Hazards caused by accessories
■
Disconnect the machine for threadless fasteners
from the power supply before replacing the
machine tool or accessories.
■
Use only accessories and consumables of the
sizes and types recommended by the manufac-
turer of the machine for threadless fasteners; do
not use any other types or sizes of accessories
or consumables.
Содержание PDBNP 14 B1
Страница 3: ...A B ...