Parkside PBH 1500 F6, Оригинальное руководство пользователя

Страница: 11 / 17

11
Function selection (Fig. G)
NOTE!
The selector switch should only be
used when the motor has stopped
completely.
Never work with chisel in inserted
(hammer) drilling position or
with the drill inserted in the chisel
position.
• Unlock the function selector switch 3 using the
unlocking latch 4 and hold it pressed.
• Turn the function selector switch so that the
arrow marking points at the desired operation
symbol.
- Drilling. For drilling wood, steel and
similar materials.
- Hammer drilling. For hammer drilling of
concrete, granite and similar materials.
- Rotation stop. Adjusting the chisel
position. For continuous adjustment of
the axis. Then rotate the function selector
switch back to the Chiselling position.
- Chiselling. For light chiselling or chipping.
• Release the unlock latch.
• Check if the function selector switch is locked in
place by trying to rotate it without pressing the
unlocking latch.
WARNING!
Do not apply excessive force on the
hammer drill.
Excessive pressure may
damage the drill, chisel or the hammer
drill and increases the risk of accident.
For this reason is it important to
always grip the drill firmly with
two hands and maintain a stable
posture.
The greater the diameter of the
drill bit, the greater is the force on your
arm.
Always secure your workpiece
in a vice or in any other clamping
device. Secure particularly large
workpieces against sliding or
support them properly.
Drilling and chiselling
Drilling
• Choose a drill bit appropriate for the
application and insert it into the tool as
described in chapter ‚Inserting the tools‘.
• Insert the drill bit properly at the desired
location.
• Press the On / Off switch 2 to start drilling.
Drilling with keyed chuck (Fig. H)
NOTE!
The tool should not be used for
hammer drilling or chiselling when
fitted with the keyed chuck.
With the keyed chuck, the hammer drill
can also be used for drilling in iron,
non-ferrous metals, wood or plastic.
• Insert the keyed chuck 13 into the tool holder
(see chapter „Inserting the tool“).
• Choose a drill bit suitable for the machining and
insert it into the keyed chuck.
• Insert the keyed chuck into one of the holes on
the sprocket.
• To tighten the chuck, turn the keyed chuck
clockwise.
• To loosen the chuck, turn the keyed chuck anti-
clockwise.
• Insert the drill bit properly at the desired
location.
• Press the On / Off switch 2 to start drilling.
For drilling concrete
and stone: Carbide tipped masonry
drill bit
For Metal HSS drill bit
For wood Twist drill bits for wood
Selecting the appropriate drill bit