Parkside PBH 1500 E5, Перевод оригинальной инструкции

Страница: 6 / 36

PBH 1500 E5
GB
│
IE
│
NI
│
CY
│ 3 ■
Total vibration value:
Total vibration values (vector total of three directions)
determined in accordance with EN 60745:
Hammer drilling in concrete: a
h(HD)
= 9 .9 m/s
2
,
K = 1 .5 m/s
2
Chiselling: a
h(CHeq)
= 18 .5 m/s
2
, K = 1 .5 m/s
2
WARNING!
► The vibration level specified in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons . The specified
vibration emission value can also be used to
make an initial exposure estimate .
The vibration level varies depending on the
use of the power tool and may, in some
cases, be higher than the value specified in
these instructions .
NOTE
► Try to keep the vibration loads as low as
possible . Measures to reduce the vibration
load are, e .g . wearing gloves and limiting the
working time . Wherein all states of operation
must be included (e .g . times when the power
tool is switched off and times where the
power tool is switched on but running without
load) .
General Power
Tool Safety Warnings
WARNING!
► Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool .
1 . Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes .
c)
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control .
2 . Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs
and matching outlets will reduce risk of electric
shock .
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or grounded .