Parkside PBH 1050 B2, Перевод оригинальной инструкции

Страница: 28 / 44

PBH 1050 B2
GB
│
MT │
25 ■
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents
are caused by poorly maintained power tools .
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control .
g) Use the power tool, accessories and tool bits,
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
power tool for operations different from those
intended could result in a hazardous situation .
5 . Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the
power tool is maintained .
Appliance­specific safety instructions
for hammer drills
■ Wear hearing protection. Exposure
to loud noise can lead to hearing loss .
■ Use the additional handle supplied with the
appliance.
Loss of control can lead to injuries .
■ Hold the appliance by the insulated handles
when you are carrying out work during which
the deployed tool may come into contact with
concealed power cables or its own power
cable.
Contact with a live wire may electrify
exposed metal parts of the power tool and
could give the operator an electric shock .
■ Wear a dust mask.
WARNING! TOXIC DUST!
► Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity .
■
CAUTION, POWER CABLES! DANGER!
Ensure that you are not likely to hit power, gas
or water supply lines when you are working
with the power tool . If necessary, check with a
service line detector before you start to cut or
drill into a surface .
Residual risks!
Even if you operate this power tool properly, there
will still be residual risks . The following risks can
occur in relation to the power tool’s design and
structure:
1 . Lung damage if no suitable dust protection mask
is worn .
2 . Hearing damage, if no suitable hearing protection
is worn .
3 . Damage to health caused by hand-arm vibrations
if the appliance is used for extended periods or
is not properly used and maintained .
WARNING!
► The power tool creates an electromagnetic
field during operation . This field can, in certain
circumstances, impair active or passive medical
implants . To reduce the risk of fatal injuries, we
recommend that people with medical implants
consult their doctor and the manufacturer of the
medical implant before operating this machine .