Parkside PBH 1050 B2, Перевод оригинальной инструкции

Страница: 25 / 44

PBH 1050 B2 ■ 22
│ GB
│
MT
HAMMER DRILL PBH 1050 B2
Introduction
Congratulations on the purchase of your new
appliance . You have chosen a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product, please
familiarise yourself with all operating and safety in-
structions . Use the product only as described and for
the range of applications specified . Please also pass
these operating instructions on to any future owner .
Intended use
The PBH 1050 B2 hammer drill and power chisel
(hereinafter referred to as appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents .
The manufacturer accepts no responsibility for
damage(s) attributable to misuse . The appliance
is not intended for commercial use .
Depicted components
Wing screw
Clockwise/anticlockwise switch
ON/OFF switch
Speed preselector wheel
Locking button for ON/OFF switch
LED
Function selector
Release button for function selector switch
Additional handle
Dust protection cap
Tool holder
Locking collar
Depth stop (not prefitted)
Quick-release chuck
Package contents
1 hammer drill PBH 1050 B2
1 additional handle
1 quick-release chuck with SDS plus system tool
fitting (see fig . A)
3 SDS drills (6/8/10 x 150 mm) (see fig . B)
1 flat chisel (14 x 250 mm) (see fig . B)
1 pointed chisel (14 x 250 mm) (see fig . B)
1 depth stop
50 g special grease for lubricating the drill chuck
1 carrying case
1 set of operating instructions
Technical data
Rated power
consumption:
1050 W
Rated voltage: 230 V ∼ 50 Hz
(AC)
Rated idling speed: n
0
0–980 rpm
Stroke rate: 0–5300 rpm
Impact energy: 3 J
Max . drill diameter: 13 mm for steel
32 mm for wood
26 mm for concrete
Protection class: II / (double insulation)
Noise emission value:
Noise measurement value determined in accord-
ance with EN 60745 . The A-rated noise level
of the power tool is typically as follows:
Hammer drilling:
Sound pressure level: L
pA
= 83 .66 dB(A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 94 .66 dB(A)
Uncertainty K: 3 dB
Chiselling:
Sound pressure level: L
pA
= 90 .62 dB(A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 101 .62 dB(A)
Uncertainty K: 3 dB
Wear hearing protection!