Parkside PASS 50 A1, Инструкции по эксплуатации и безопасности

Страница: 8 / 33

8 GB/IE/NI
Before use
Note: Remove all packaging materials from the
product.
Place the work light
1
only on a stable sur-
face without any angle.
Check the stability of the work light
1
.
Align the work light
1
into the desired direc-
tion. For this, you may alignment the stand
2
to desired direction. After alignment, check
that the work light
1
is stable.
Use
Plug the plug
3
into the socket.
Press the switch
5
to position I or position II
(maximum brightness) to switch on the product.
Note: Insert the plug to the corresponding
IPX4 socket only during outdoor use.
Connect the plug into
the socket of work light
Open the socket cover
4
behind the product.
Connect an additional item by plugging it into
the socket
6
of the work light
1
(see Fig.).
Close the socket cover
4
(For HG06704-BS).
For HG06704-BS, lock with interlock
7
.
Note: Make sure the addition item with
water proof plug. For waterproof mains plugs,
there is a marking of IP44 marking.
Note: Do not connect any appliance with a
total output of > 2500 W. Otherwise there is
the risk of a fire.
For HG06704/HG06704-FR:
The socket of work light is only IPX4 protected.
Insert only corresponding IPX4 plug only for
outdoor use.
RISK OF ELECTRIC SHOCK! Water may
enter the product if incorrect plug is used
For HG06704-BS:
The socket is only IPX4 protected.
The socket can only protected from water
when the cover is completely closed. Ensure
the interlock
7
of socket cover
4
is locked.
Water may enter the product if the cover is
not corrected posited.
CAUTION: Do not move the power cord of
the product after connecting the power plug
3
with a socket outlet. There is a risk that the
product will slip or tip over.
Cleaning and care
Never immerse the product in water or other
liquids. Otherwise the product can be dam-
aged.
Remove the plug
3
from the socket and allow
the product to cool down.
Clean the product with a lint-free, slightly
moist cloth and mild cleaning agent.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fi-
breboard / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.