Parkside PAS 1200 F5, Перевод оригинальной инструкции по эксплуатации и безопасности

Страница: 15 / 82

13 GB
˜
Before first use
m WARNING!
u
The product and the packaging are not
children’s toys! Children must not play with
plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
Unpack all parts and remove all packaging
materials .
Make sure the delivery contents are
complete and free of damage (Fig . A, B) . If
you find that parts are missing or damaged,
do not use the product and contact your
dealer .
Using an incomplete or damaged product
represents a hazard to people and property .
˜
Assembling the swivel casters
Fig . C
Turn over the metal container
[ 5]
so that the
bottom surface faces upward .
Align the back of the swivel casters
[ 8]
with the centre marking
[ 20]
on the metal
container
[ 5]
.
Slide and press down the swivel casters
[ 8]
until they audibly click into place at the rim of
the metal container
[ 5]
.
˜
Before use
˜
Connecting the hose
Fig . D
Vacuum cleaning
Align
[ 12]
with the notch in the vacuum
connector
[ 4]
.
Push the hose coupler
[ 10]
fully into the
vacuum connector
[ 4]
.
Turn the hose coupler
[ 10]
in a clockwise
direction until it is fully engaged .
Check if the hose
[ 9]
is installed properly
by pulling the hose coupler
[ 10]
slightly . If
the hose coupler does not move, the hose is
connected properly .
Blowing air
Align
[ 12]
with the notch in the blow
connector
[ 1]
.
Push the hose coupler
[ 10]
fully into the blow
connector
[ 1]
.
Turn the hose coupler
[ 10]
in a clockwise
direction until it is fully engaged and locked
in place .
Check if the hose
[ 9]
is installed properly
by pulling the hose coupler
[ 10]
slightly . If
the hose coupler does not move, the hose is
connected properly .
˜
Disconnecting the hose
Disconnecting the hose
[ 9]
from the vacuum
connector
[ 4]
or the blow connector
[ 1]
:
Rotate the hose coupler
[ 10]
in an anti-
clockwise direction . Pull out the hose coupler .