Parkside PAHS 12 B2, Инструкция по эксплуатации

Страница: 10 / 28

PAHS 12 B2
GB
│
IE
│
NI
│ 7 ■
1 .) To remove the battery pack , press the re-
lease button and pull the battery pack
out of the appliance .
2 .) Insert the battery pack into the battery
charger .
3 .) Insert the power plug into the socket . The control
LED lights up red .
4 .) The green charge status indicator LED shows
you when the charging process is complete and
the battery pack is ready for operation .
5 .) Push the battery pack back into the appli-
ance .
Checking the battery charge level
If the appliance is switched on, the remaining
charge will be shown on the battery LED as
follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Operation
NOTE
► Always switch the sander on before applying
it to the workpiece .
Switching the appliance on:
♦ Press the ON/OFF switch .
Switching the device off:
♦ Press the ON/OFF switch .
Dust extraction
WARNING! RISK OF FIRE!
► When working with power tools that have a
dust collection box or can be connected to
a vacuum cleaner via the vacuum cleaner
adapter, there is a risk of fire! In unfavourable
conditions, e .g . when sparks are flying while
sanding metal or metal residues in wood,
wood dust in the dust sack (or in the vacuum
cleaner dust bag) can spontaneously ignite .
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time . Therefore, do
not allow the workpiece to overheat and
always empty the dust box or the dust bag
of the vacuum cleaner before taking a break
from work .
Wear a dust mask!
WARNING!
► Always disconnect the battery pack be-
fore carrying out any work on the appliance .
Dust collection box
Connection:
♦ Push the dust collection box onto the multi-
sander as far as the stop .
Removal:
♦ Press the release button of the dust collection
box and pull it off towards the rear .
NOTE
► To achieve optimum dust extraction, the dust
collection box should be emptied
regularly .
♦ To do this, remove the dust collection box
from the appliance as described above . Open
the dust box by pulling on the tab and then
removing the lid . Clean both parts thoroughly
by tapping them out .