Parkside PAH 1300 A1, Оригинальное руководство пользователя

Страница: 8 / 28

PAH 1300 A1 GB
│
IE
│
5 ■
Installation
Additional handle:
♦ You can position the additional handle as
you wish.
♦ Undo the knurled nut .
♦ Swing the additional handle around the
appliance axis or 180° forward or backward
into the desired position (see foldout page).
♦ Retighten the knurled nut .
Fitting a tool:
♦ Pull the locking sleeve backwards.
♦ Insert the tool with a rotating movement in the
tool holder until it clicks into itself.
♦ Release the locking sleeve .
This locks the holder.
Check that the tool is properly locked by pulling
it. The system has radial play because of the
design.
Removing a tool:
♦ Pull the locking sleeve backwards and pull
the tool out of the tool holder .
Adjust chisel position:
♦ You can adjust the flat chisel in optimal
working position.
♦ Place the flat chisel into the tool holder .
♦ Push the chisel adjustment ring forward and
turn with the chisel adjustment ring the flat
chisel to the required position.
♦ Release the chisel adjustment ring and turn
him until it clicks.
Operation
Switching on and off
During operation, you can choose between instan-
taneous and continuous operation.
Switching to instantaneous operation:
♦ Press the ON/OFF switch .
Switching off instantaneous operation:
♦ Release the ON/OFF switch .
Switching to continuous operation:
♦ Press the ON/OFF switch and lock it in this
position with the locking switch .
Switching off continuous operation:
♦ Press the ON/OFF switch and release it
again.
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Use a soft, dry cloth to clean the housing.
■ Clean the tool holder regularly:
♦ Before fitting a tool into the tool holder ,
grease it lightly.
WARNING!
■ If the replacement of the supply cord is nec-
essary, this has to be done by the manufac-
turer or his agent in order to avoid a safety
hazard.