GB
- 65 -
7.9 Battery capacity indicator
(Fig. 8 / Item 5)
Press the button for the battery capacity indicator
(6). The battery capacity indicator (5) indicates
the charge state of the battery on 3 colored LEDs.
All LEDs are lit:
The battery is fully charged.
The yellow and red LEDs are lit:
The battery has an adequate remaining charge.
Red LED:
The battery is empty, recharge the battery.
7.10 Screwdriving
It is advisable to use self-centering screws (e.g.
Torx, cross recessed head) as these will enable
you to work safely and reliably. Always make sure
that the bit used is of the same size and shape as
the screw.
7.11 LED light (Fig. 1/Item 12)
The LED light (12) can be used in poor lighting
conditions to illuminate the area where you want
to drill or screw. The LED light (12) will come on
automatically as soon as you press the On/Off
switch (8).
8. Cleaning, maintenance and
ordering of spare parts
Always pull out the mains power plug before star-
ting any cleaning work.
8.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the
plastic parts of the equipment. Ensure that no
water can seep into the device.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2002/96/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Anl_4513631.indb 65
Anl_4513631.indb 65
08.02.13 08:19
08.02.13 08:19
Содержание PABH 18 LI A1
Страница 70: ...70 Anl_4513631 indb 70 Anl_4513631 indb 70 08 02 13 08 19 08 02 13 08 19...
Страница 71: ...71 Anl_4513631 indb 71 Anl_4513631 indb 71 08 02 13 08 19 08 02 13 08 19...
Страница 72: ...72 Anl_4513631 indb 72 Anl_4513631 indb 72 08 02 13 08 19 08 02 13 08 19...
Страница 73: ...73 Anl_4513631 indb 73 Anl_4513631 indb 73 08 02 13 08 19 08 02 13 08 19...
