Parkside PAAS 20-Li A1, Оригинальное руководство пользователя

Страница: 15 / 90

15
CY GB
Spare parts/accessories
You can get spare parts and accessories from www.grizzlytools.shop
If you have issues ordering, please use the contact form. If you have any other questions,
please contact the Service Centre (see page 17).
Position instruction
manual Position ex-
ploded view
Name Order no.
2,11,12,13
20-22 Cutting blade with assembly tool:
Cutting blade, hex key with Phillips
screwdriver, open-end spanner 91110232
Troubleshooting
Problem Possible cause Remedy
Device does not
start
Battery (17) discharged
Charge the battery (see chapter “Charging
the battery”)
Battery (17) not inserted
Insert the battery (see chapter “Removing/
inserting the battery”)
On/off switch (8)/start
lever (10) not actuated Switch on (see chapter “Switching on and
off”)
On/off switch (8)/start
lever (10) defective
Repair by Service Centre
Device works
with interruptions
Internal loose contact
Repair by Service Centre
On/off switch (8)/start
lever (10) defective
Blades become
hot
Blade (2) blunt
Replace the blade (2) (see chapter “Replac-
ing the cutting blade”)
Blade (2) has nicks
Check or replace the blade (2) (see chap-
ter “Replacing the cutting blade”)
Blade (2) dirty Clean the blade (2) (see chapter “Cleaning”)
Too much friction
Check fi t of
gear nut (3) and screw (5)
(see chapter “Changing the cutting blade”
–
Trial run )
Green LED (9)
fl ashing
Overload
Cut thinner or softer material
Check fi t of
gear nut (3) and screw (5)
(see chapter “Changing the cutting blade”
–
Trial run )
Battery (17) empty
Charge the battery (see chapter “Charging
the battery”)v
Error Contact the service centre