Parkside BJ 2002, Руководство по эксплуатации и технике безопасности

Страница: 5 / 10

GRINDING
Attachments: Figure d): 2 "diamond bits" , 1 silicon grinding point (green) ,
4 corundum grinding points (red) , 2 silicon grinding discs (green) ,
2 corundum grinding discs (red)
Areas of use: The "diamond bits” are suitable for fine work on all materials. The green silicon attachments
(grinding point and grinding disc ) are suitable for working on hard materials such as glass,
ceramics or alloy steel. You can use the red corundum attachments (grinding point and grinding
disc ) for cleaning, polishing, sharpening and grinding metal (see Fig. e).
Speed ranges:
CLEANING
Attachments: Figure f): 1 plastic brush , 1 plastic brushing disc , 1 brass brushing disc
Areas of use: The cleaning attachments can be used for cleaning cutlery, jewellery or tools (see also Fig. g).
The brass brushing disc
does not create sparks and is softer than steel. This ensures that the
tools do not leave behind any scratches on softer materials and thus are very suitable for gold,
copper, brass and other precious metals.
Speed ranges:
MILLING
Attachments: Figure h): 3 milling bits
Areas of use: The 3 milling bits are suitable for high speed milling of various materials. Use these
attachments particularly for miscellaneous types of work such as recessing, carving, shaping,
grooving or chasing (see Fig. i).
Speed ranges: :
5
Material Speed Controller setting
Shell/stone minimum
Ceramics low
Glass low
Aluminium etc. low
Material Speed Controller setting
Shell/stone minimum
Steel min. – low
Aluminium etc. min. – low
Material Speed Controller setting
Hardwood maximum
Softwood maximum
Plastic min. – low
Steel low – medium
Aluminium etc. low – medium