Parkside BJ 2002, Руководство по эксплуатации и технике безопасности

Страница: 4 / 10

TECHNICAL INFORMATION
MAINS ADAPTER:
Nominal voltage: 230 V ~ 50 Hz
Nominal output voltage: 24 V
Nominal current:
1050 mA
MINI DRILL:
Length: Approx. 200 mm
Weight: Approx. 215 g
Nominal speed: no 20,000 rpm max.
Power consumption:
No-load power consumption at minimum speed: 6.3 watts
No-load power consumption at maximum speed: 10.0 watts
Power consumption with saw blade in saw mode at minimum speed: 20.0 watts
Power consumption with saw blade in saw mode at maximum speed:
≥
40.0 watts
OPERATING FEATURES
ON / OFF switch Hanger
Speed controller Spindle lock
Cable to mains adapter Chuck
Mains adapter
IMPORTANT SAFETY ADVICE
Note: In the interests of your own safety please read through the following safety advice carefully and make yourself
familiar with all the functions of the equipment. In addition, you must also read the advice in the accompanying booklet
called "Safety advice" before using the equipment for the first time.
Be careful to retain these operating instructions and safety advice notes and if necessary pass them on to a third party.
OPERATING INSTRUCTIONS
To obtain the best results do not use too much pressure but try to work using a constant speed.
The following basic rules apply: small tools = high speed and large tools = low speed.
For milling and engraving work, hold the tool like a pen (keeping the ventilation slots free).
For coarse work, hold the tool like a hammer.
CUTTING AND SAWING
Attachments: Figure a): 1 saw blade , 10 cutting discs
Areas of use: The saw blade is suitable for plastic and wood (see Fig. b).
Use the cutting discs for cutting steel, metal (see Fig. c), wood or plastic.
Speed ranges:
4
Material Speed Controller setting
Hardwood maximum
Softwood maximum
Plastic medium
Steel low
Aluminium etc. high