Parkside 385566 2107, Перевод оригинальной инструкции

Страница: 6 / 56

6
GB IE
Warning: The vibration and noise
emissions may deviate from the
specified values during actual use
of the power tool, depending on
how the power tool is being used
and, in particular, what kind of ma-
terial is being worked on.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the op-
erating cycle have to be considered
while doing so (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).
Charging time
The device is part of the Parkside X 20 V
TEAM series and can be operated with
batteries of the Parkside X 20 V TEAM
series.
Batteries of the Parkside X 20 V TEAM
series may only be charged using chargers
of the Parkside X 20 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAP 20 B1, PAP 20 B3.
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C3,
PDSLG 20 A1.
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku
Charging time
(min)
PAP 20 A1
PAP 20 B1 PAP 20 A2
PAP 20 A3
PAP 20 B3
Smart
PAPS 204 A1
Smart
PAPS 208 A1
PLG 20 A1
PLG 20 A4
PLG 20 C1
60 90 120 120 210
PLG 20 A2
45 60 80 80 165
PLG 20 A3
PLG 20 C3
35 45 60 50 120
PDSLG 20 A1
35 45 60 50 120
Smart
PLGS 2012 A1
35 40 40 40 50
Safety instructions
Ensure that the safety instructions are ob
-
served when operating the appliance.
Symbols and icons
Symbols on the appliance:
This device is part of the
Parkside X 20 V TEAM series
Attention!
Carefully read these operating in-
structions.
Wear ear protection.
Wear eye protection.
Wear respiratory protection.
Wear safety gloves.