Parkside 384483 2107, Перевод оригинальной инструкции

Страница: 10 / 148

PSBM 1100 B1
GB
│
IE
│ 7 ■
Depth stop
♦ Undo the screw on the depth stop .
♦ Insert the depth stop into the additional
handle .
♦ Make sure that the teeth on the depth stop
point upwards and downwards.
♦ Pull the depth stop out until the distance
between the tip of the drill and the tip of the
depth stop corresponds with the required drilling
depth.
♦ Tighten the screw on the depth stop to
lock the depth stop into place.
Changing tools
The appliance has a fully automatic spindle lock.
♦ When the motor is stopped, the power train
locks so that the quick-release chuck can be
opened by turning it towards
UNLOCK .
♦ Insert the desired tool into the quick-release
chuck .
♦ Turn the quick-release chuck towards
LOCK to tighten the tool.
♦ The spindle lock is automatically released when
the motor starts (ON/OFF switch pressed).
Operation
Select operating mode
Function selector switch
♦ Move the function selector switch so that the
required symbol engages:
Function Symbol
Drilling
Impact drilling
Select direction of rotation
WARNING!
► The rotation direction switch may only be
used/adjusted if the device is at a standstill.
♦ Select the direction of rotation by pressing the
rotation direction switch towards the left or
right.
2-speed gearbox
CAUTION!
► Operate the speed selector only when
the appliance is at a standstill. Otherwise,
the appliance can be damaged. If it is not
possible to move the selector, briefly press
the ON/OFF switch and then try again.
► Press the speed selector only
in the lower half of the dial! Turn
the speed selector so that the
required gear engages at the
marking.
In first gear
(speed selector switch in position 1)
This setting is suitable for light drilling, pre-drilling,
work using a large-diameter drill, and the use of
accessories.
In second gear
(speed selector switch in position 2)
This setting is suitable for carrying out drilling work
with a small-diameter drill.
Preselecting the rotation speed
You can use the rotational speed preselector
adjusting wheel to preselect the rotational
speed. The speed you select depends on the mate-
rial to be processed. Work out the correct settings
by carrying out a test.
NOTE
► The appliance only reaches the set rotational
speed during continuous operation.