Parkside 373210-2104, Перевод оригинальной инструкции

Страница: 50 / 76

PMTS 180 A1
GB
│
MT
│ 47 ■
Technical data
Rated voltage 230 V ∼, 50 Hz
(alternating current)
Rated power consumption 1280 W
Rated idle speed n
0
7700 rpm
Cutting disc mounting Ø 22.23 mm
Thread size M8
Maximum speed of the cutting
disc 8500
rpm
Working speed of the cutting
disc
max. 80 m/s
Cutting disc diameter Ø 180 mm
Cutting disc thickness 1.6 mm
Inclined cuts 0°–45°
max. cut depth
50mm
50 mm at 0°
mitre angle
Protection class II / (double
insulation)
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
L
PA
= 93 dB(A)
Uncertainty K
PA
= 3 dB
Sound power level L
WA
= 106 dB (A)
Uncertainty K
WA
= 3 dB
Wear hearing protection!
WARNING!
► Depending on the manner in which the
power tool is being used and, in particular,
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate and may sometimes exceed the
values given in these instructions. Regular use
of the power tool in this way may cause the
user to underestimate the vibration. Try to
keep the vibration loads as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General Power Tool
Safety Warnings
WARNING!
►
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool.
Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.