Parkside 373118-2104, Перевод оригинальной инструкции, Страница: 11 / 40

PMFW 310 D2 ■ 8 │
GB
│
IE
│
NI
│
CY
HCS/HS
S
HC
S
HCS
C
C
C
A1
Scraper Z52 A1
Materials
mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application
– removal of material residues, such as tile
adhesive, when replacing damaged tiles
Changing tools
NOTE
► If you plan to use the dust collection unit, it
must be connected before fitting or changing
the tool (see section “Connecting a dust
extraction device”) .
WARNING! RISK OF INJURY!
■ Always remove the plug from the power
socket before working on the power tool .
■ Check that the tool is fitted firmly . Incorrectly or
insecurely fitted tools can come loose during
use and cause you an injury .
■ If necessary, remove an already fitted tool .
To do this, raise the tool release lever .
■ Fit the tool (e .g . the plunge saw blade ) onto
the tool holder .
NOTE
► You can fit the tools in any snap position on
the tool holder .
■ Lock the tool into place by pushing the tool
release lever back down again .
Fitting the sanding sheet onto
the sanding plate
Attaching
♦ Sanding sheets are attached to the sanding
pad by means of the hook and pile
fastening .
NOTE
► Before fitting a new sanding sheet , remove
any dust and dirt from the sanding pad .
► Note that the holes for dust extraction from
sanding sheet and sanding pad are
aligned .
♦ Position the sanding sheet flush on one side
of the sanding pad , then place the sanding
sheet on the sanding plate .
Operation
Switching on and off
Switching on
♦ Push the ON/OFF switch forwards to switch
the appliance on .
Switching off
♦ Push the ON/OFF switch backwards to
switch the appliance off .