Parkside 353555 2010, Перевод оригинальной инструкции

Страница: 13 / 46

■ 10 │
GB
│
IE
│
NI
│
CY
PHKS 1350 C2
WARNING!
► The arrow on the saw blade must corres-
pond to the arrow showing the direction of
rotation (running direction shown on the
device) .
■ Ensure that the saw blade is suitable for the
rotational speed of the tool .
Mounting/setting the guide fence
♦ Loosen the wing screw and insert the guide
fence into the guide fence slot .
♦ Set the desired cut width with the help of the
scale on the guide fence and the marking
arrow in the base plate (see also Fig . B) .
Fig. B: Cutting width 3 cm
♦ Retighten the wing screw .
Connecting the sawdust extraction
appliance
♦ Attach the adapter for dust extraction to the
chip ejector .
♦ Connect an approved dust and chip extraction
device .
Operation
Switching on and off
Switching on
♦ Push the safety lock-out to the left or right
and keep it pressed .
♦ Press the ON/OFF switch . Once the saw is
running you can release the safety lock-out .
Switching off
♦ Release the ON/OFF switch .
Setting the cutting angle
You can select the cutting angle with the help of the
cutting angle scale .
■ Release the wing screw on the cutting angle
preselector , set the desired angle on the
cutting angle scale and then re-tighten the
wing screw .
Setting the cutting depth
NOTE
► We generally recommend setting the cutting
depth to approx . 3 mm more than the thick-
ness of the material . This ensures that you
achieve a clean cut .
♦ Release the locking screw , set the desired
cutting depth on the cutting depth scale and
then re-tighten the locking screw .
Working with the circular saw
1 . Switch on the device – as described in
˝Switching on and off˝ – and then place it with
the front edge of the base plate on the
material .
2 . Align the machine using the guide fence or
by using a marked line .
3 . Hold the machine in both hands using the
handles and saw by exerting an even pressure .