51
GB
IE
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
Maintenance intervals
Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Oiling the saw chain
Clean and oil the chain regularly.
In this way, you keep the chain
sharp and get optimum machine
performance. In case of damage
due to inadequate maintenance
of the saw chain, the guarantee
claim is invalid. Remove the battery
and use cut-resistant gloves when
working with the chain or with the
blade.
• Oil the chain after cleaning, after 10
hours of use or at least once weekly,
depending on which comes first.
• Before oiling, the chain bar must be
cleaned thoroughly, in particular the
teeth of the rail. Use a whisk and a dry
cloth for that.
• Oil the individual chain links with the
aid of an oil suction gun with pinpoint
tip (available in the specialist trade).
Place individual oil drops onto the ar-
ticulated links and onto the tooth tips of
the individual chain links.
Maintenance Interval Table
Machine part
Action
Before every
use
After 10 hours
of operation
Components of
the chain brake
Check, replace if required
Sprocket chain
wheel (20)
Check for wear/indentations,
replace if necessary
Saw chain (7)
Check oil, regrind or replace
if required
Guide bar (8)
Check, clean and oil
Guide bar (8)
Turn around
Automatic oil
system
Check, clean oil aperture if
necessary