Parkside 339929 1910, Перевод оригинальной инструкции

Страница: 26 / 156

26
IE GB
Overview
1 Motor housing
2 Handle
3 Volume control
3a Turbo button
4 On/Off switch
5 Rechargeable battery
5a Release button
6 Charger
7 Protective cover, suction aperture
7.1 Marking, protective cover for
suction aperture
7.2 Marking, motor housing
8 Locking button for suction aper-
ture
9 Blowpipe (three-part)
10 Locking button for blowing aper-
ture
11 Additional handle
12 Fastening eyelets for carrying
strap
13 Carrying strap
14 Collection bag carabiner
15 Collection bag
16 Suction pipe (three-part)
17 Angle adjuster for additional
handle
18 Battery charge level indicator
19 Collection bag eyelets
20 Ventilation opening of collection
bag
21 Push-fit lock
Technical data
Cordless leaf
blower/vacuum ........ PLSA 40-Li B1
Motor voltage .............. 40 V (2x 20 V)
Current strength .............................. 16 A
Rated power ........................max. 580 W
Rated speed n ......... 6 000 - 16 300 min
-1
Air speed ........................max. 285 km/h
Air suction volume ............ max. 450 m
3 /h
Shredding rate .................................10:1
Collection bag ................................. 45 l
Protection type................................. IPX0
Weight (without battery)
Blow function .......................... 2,75 kg
Suction function ....................... 3,70 kg
Sound pressure level
(L
pA
) ................... 83,4 dB (A), K
pA
= 3 dB
Sound power level (L
WA
)
guaranteed ............................ 96 dB(A)
measured ..........94 dB(A); K
WA
= 2,43 dB
Vibration (a
h
)
handle ................1,10 m/s 2 ; K= 1,5 m/s 2
additional handle 1,06 m/s 2 ; K= 1,5 m/s 2
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may only be charged
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.