8
z
Assembly
Please note:
Dispose of all packaging material�
The magnet
7
allows for the cordless work light
to be attached to a metal surface� Make sure that
the surface is flat and even to ensure the light can
be securely fastened� The battery-powered work
light can also be fixed using the hook
8
, or
simply be placed on a smooth surface�
z
Charging the battery
Turn the product off if necessary by pressing the
ON/OFF switch
4
�
Position the charging station
9
on an even
surface�
Place the cordless work light
1
onto the
charging station provided
9
� Now connect the
USB charging cable
12
with the USB port on
the charging station
11
and connect the other
end of the cable with a standard USB interface�
The battery charging process begins� The
charge level indicator
5
shows the charging
status (three levels) of the cordless work light
1
with a blue flashing light� The charging station’s
9
readiness for use is indicated by the red LED
10
� The LED indicating readiness for use
10
is lit
continuously, if the charging station is
connected to a power source�
First level
= approx� 35 %,
Second level = approx� 67 %,
Third level
= 100 %
It is also possible to charge the cordless work
light without the charging station� To do so,
connect the USB charging cable with the USB
port
6
and a standard USB interface�
z
Switching the battery-powered
work light ON/OFF
Unfold the cordless work light�
The ON/OFF switch
4
allows for the cordless
work light to be turned on and off and for its
brightness to be controlled� Battery capacity is
indicated by the 3-level charge indicator
5
�
By pressing the ON/OFF switch
4
, you can
operate the LEDs as follows:
Press 1 x: 100 % COB-LED (2) is activated
Press 2 x: 50 % COB-LED (2) is activated
Press 3 x: LED (1) is activated
Press 4 x: The cordless work light is turned OFF�
z
Cleaning and storage
Switch off the product by pressing the ON/
OFF switch
4
when you are not using the
product, and would like to store it�
Check the cordless work light for any soiling on
a regular basis� Remove any dirt to ensure the
product works correctly�
Clean the product with a clean, damp cloth and
a mild detergent�
z
Troubleshooting
= Fault
= Cause
= Solution
= The product will not switch on�
= The product is switched off�
= Press the ON/OFF switch
4
to turn on the
product�
= The light is flickering�
= The battery is almost empty�
= Charge the battery (see section “Charging
the battery”)�
