Parkside 327190 1904, Перевод оригинальной инструкции

Страница: 14 / 58

14
GB IE
To release
1. Release the retainer nut of adapter
( 2) on the adapter ( 1).
2. Loosen retainer nut ( 3) on the
extension element ( 4).
3. Release the catches by pushing
and turning through 90° in the op-
posite direction (Bayonet catch).
Start-up
Working instructions
Take heed of the backstroke gen-
erated by the jet of water. Stand
firmly and hold the jet gun tightly.
You may otherwise injure yourself
or others.
• Do not release water from the pressure
washer until the patio cleaner rests on
the surface you are cleaning.
• Always hold the patio cleaner by the
handle (5) when washing down walls.
• Avoid the patio cleaner going over
free corners.
• The patio cleaner is not designed for
scouring out or scrubbing.
Pressure control
1. You can adjust the pressure of
the escaping water jet by turning
the pressure regulator (9). Accor-
dingly, the rotation speed of the
nozzles changed
2. Increase the pressure (+) by tur-
ning the pressure regulator (9) in
a clockwise direction. Reduce the
pressure
(–) by turning the screw
counterclockwise connnections.
Cleaning and
Maintenance
Always remove the mains plug of
the high pressure cleaner before
working on the device. There is a
risk of electric shock or injury from
moving parts.
Cleaning
Always keep the washer clean. Do
not use any detergents or solvents.
• Only clean the pressure washer with a
soft brush or a slightly moist cloth.
Maintenance
The device is maintenance-free.
Storage
• Store the device in a frost-free room.
Waste Disposal and
Environmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center about
this.
Defective units returned to us will be
disposed of for free.