Parkside 326391 1904, Перевод оригинальной инструкции

Страница: 18 / 170

18
GB IE
Warning! Observe the safety
information in the operating
instructions for your Parkside
X 20 V Team series recharge-
able battery.
Assembly
1. Press the four rolls ( 25) into the
sockets ( 26) on the underside of
the dirt container (6) until they click into
place.
2. Insert the paper fi lter bag (19) (
23 dry vacuuming - using a paper fi lter
bag):
3. Place the motor head ( 1) onto the
dirt container ( 6) and lock
it into place using the locking clips
( 8).
4. Attach the suction hose (12) and ac-
cessories.
Operation
Fully unwind the suction hose (
12) before commencing work.
Switching on/off
Switching on the vacuum:
On/off switch ( 3) in position “I”.
Switching off the vacuum:
On/off switch ( 3) in position “O”.
Check the charge level
The charge level indicator on the
appliance displays the battery
charge level when the appliance
is running.
LED illuminated green: Battery charged
LED illuminated yellow:
Battery partially
charged
LED illuminated red:
Battery low
LED fl ashing red:
Battery needs to be
charged
Nozzle usage
Crevice nozzle (
15):
for vacuuming gaps, corners and radiators.
Housekeeping nozzle ( 16)
For wet and dry vacuuming, for removing
stubborn dirt.
Floor nozzle ( 17) with insert at-
tachment (
18):
for wet and dry vacuuming of smooth sur-
faces and fi tted carpets.
Floor nozzle ( 17) without insert
attachment (
18):
for wet and dry vacuuming of fi tted carpets
and for removing persistent dirt.
• Press the clips on the right and left side
of the fl oor nozzle (
17) and remove
the insert attachment ( 18).
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Wet vacuuming
1. Remove the paper fi lter (
19) and
folded fi lter (
23).
2. Suctioning up (draining) water: place
the suction hose ( 12) on the handle
( 11) into the water tank and suc-
tion up the water.