Parkside 323395 1904, Перевод оригинальной инструкции

Страница: 61 / 83

PDSS 310 B5
GB
│
MT
│ 57 ■
Additional safety instructions for
pneumatic machines
■ Compressed air can cause serious injuries:
–
When the machine is not in use, the air
supply must always be shut off and the air
hose depressurised . The machine must be
disconnected from the compressed air supply
before replacing accessories or when carry­
ing out repair work .
–
Never aim the airflow at yourself or anyone
else .
■ Thrashing hoses can cause serious injury .
You should therefore always check whether the
hoses and their fixings are undamaged and
have not come loose .
■ Cold air must be directed away from the hands .
■ Do not use quick­lock couplings on the tool inlet
for impact and impulse drills . For hose connec­
tions with a thread, always only use those made
of tempered steel (or a material with compara­
ble impact resistance) .
■ If universal rotary joints (claw couplings) are
used, locking pins must be inserted and Whip­
check hose restraints must be used to provide
protection in the event of failure of the con­
nection between the hose and the machine or
between one hose and another .
■ Ensure that the maximum permissible pressure
specified on the machine is not exceeded .
■ For torque­controlled machines with continuous
rotation, the air pressure has safety­related
effects on performance . Requirements for the
length and diameter of the hose must therefore
be defined .
■ Never carry pneumatic machines by the hose .
Additional safety information
■ If applicable, observe special work safety or
accident prevention regulations for the handling
of compressors and compressed air tools .
■ Ensure that the maximum permissible working
pressure specified in the technical data is not
exceeded .
■ Do not overload this tool – use this tool only
within the capacity range specified in the
Technical Data .
■ Use safe lubricants . Ensure that the work area is
sufficiently ventilated . In the event of increased
discharge: Check the compressed air tool and
have it repaired if necessary .
■ Do not use this tool if you are distracted .
Be alert, watch what you are doing and use
common sense when operating a compressed
air tool . Do not use tools if you feel tired or are
under the influence of drugs, alcohol, or medi­
cation . A moment of inattention when operating
the tool can result in serious personal injuries .
■ Keep work area clean and well lit .
Cluttered or dark areas invite accidents .
■ Keep compressed air tools out of the reach
of children .
■ Do not store the tool outdoors or in damp en­
vironments without protection .
■ Protect the compressed air tool from dust and
dirt, particularly the compressed air connection
and the operating elements .
Before use
NOTE
► The compressed air tool may only be operat­
ed using cleaned, oil­atomised compressed
air, and the maximum operating pressure of
6 .3 bar must not be exceeded on the tool .
The compressor must be fitted with a pressure
reducer to regulate the working pressure .
► Wrap Teflon tape around all threaded
connections (not supplied) .