Parkside 317724, Перевод оригинальной инструкции

Страница: 21 / 94

21
IE GB
d) The workpiece gets hot dur-
ing grinding. Do not touch the
machined area, allow it to cool
down.
There is a risk of burning. Do
not use coolants or the like.
e) Always empty the dust con-
tainer before work breaks.
Sanding dust in the dust sack, micro
filter, paper sack (or in the filter sack or
extraction system filter) can self-ignite
under unfavourable conditions such
as flying sparks caused by grinding
metals. Particular hazards are caused
if the sanding dust is mixed with paint,
polyurethane residues or other chemi-
cal substances, or if the sanded object
is hot after long working periods.
Please check the operating manual of
your vacuum cleaner whether it is suit-
able for the suction of grinding chips.
f) Connect the appliance to a power
socket with a residual current circuit
breaker of rated residual current no
more than 30 mA.
g) If the supply cord of this power
tool is damaged, it must be re-
placed by a specially prepared
cord available through the ser-
vice organization.
h) Avoid working with materials that may
be harmful to health, e.g. asbestos or
lead paints.
j) Wait for the sanding plate to come to
a stop before putting the device down.
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Abrasions.
c) Ear damage if working without ear
protection.
d) Eye damage if suitable eye protection
is not worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.
Initial start-up
Attaching/removing
sanding sheet
Clean the sanding disc before you
attach a sanding sheet.
Always remove the mains plug be-
fore working on the appliance.
Use only appropriate sanding sheet
sizes. Sanding sheets, which ex-
tend beyond the sanding disc, can
cause injuries and can cause the
sanding sheets to block or tear.
The sanding disc (4) is fitted with Velcro for
rapid attachment of the sanding sheet (7).