PAMFW 20-Li A1
GB
│
IE
│
NI
│
CY
│
7
■
Charging the battery pack (see fig . A)
CAUTION!
►
Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger .
■
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
♦
Connect the battery pack to the high-speed
battery charger (see Fig . A) .
♦
Insert the power plug into the socket .
The control LED lights up red .
♦
The green LED indicates that the charging
process is complete and the battery pack is
ready .
CAUTION!
♦
If the red control LED flashes, this means
that the battery pack has overheated and
cannot be charged .
♦
If the red and green control LEDs both
flash, this means that the battery pack is
defective .
WARNING! RISK OF INJURY!
■
Always remove the battery before working on
the power tool .
♦
Push the battery pack into the appliance .
♦
Switch off the charger for at least 15 minutes
between successive charging sessions . Also
disconnect the power plug from the mains
power socket .
Dust/chip extraction
Materials containing asbestos must not be
processed . Asbestos is a known carcinogen .
WARNING! RISK OF FIRE!
■
When working with electrical appliances
which can be connected to a vacuum cleaner
via a vacuum cleaner adapter, there is a risk
of fire! In unfavourable conditions, e .g . when
sparks are flying while sanding metal or
metal residues in wood, wood dust in the bag
of the vacuum cleaner can spontaneously ig-
nite . This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after be-
ing worked for a long time . Therefore, avoid
overheating of the material being sanded
as well as the appliance . Always empty the
vacuum cleaner’s dust bag before taking
work breaks .
■
Always use dust extraction .
■
Ensure that your workplace is adequately
ventilated .
■
Observe the regulations applicable in your
country regarding the materials to be worked .
Connecting a dust extraction unit
♦
Place the dust extraction unit under the appli-
ance and fix it into place on the appliance with
the screw .
♦
Fit the angle adapter onto the dust extraction
unit .
The angle adapter can be turned by up to
180° .
Содержание 315570
